Protetik Diş Tedavisinde Üç Boyutlu Yazıcıların Dental Kullanımı: Eklemeli Üretim Materyalleri ve Güncel Yaklaşımlar

Barazanchi A, Li KC, Al-Amleh B, et al. Additive technology: update on current materials and applications in dentistry. J Prosthodontics. 2017;26(2): 156–163.

Vukicevic M, Mosadegh B, Min JK, et al. Cardiac 3D printing and its future directions. JACC Cardiovasc Imaging. 2017;10(2): 171-184.

Farooqi KM, Sengupta PP. Echocardiography and three-dimensional printing: sound ideas to touch a heart. J Am Soc Echocardiogr. 2015;28(4): 398-403.

Mai HN, Lee KB, Lee DH. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017;118(2):208-215.

Gross BC, Erkal JL, Lockwood SY, et al. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem. 2014;86(7): 3240-3253.

Lin HH, Lonic D, Lo LJ. 3D printing in orthognathic surgery − a literature review. J Formos Med Assoc. 2018;117(7):547-558.

Oberoi G, Nitsch S, Edelmayer M, et al. 3D printing-encompassing the facets of dentistry. Front Bioeng Biotechnol. 2018;6:172.

Prechtel A, Reymus M, Edelhoff D, et al. Comparison of various 3D printed and milled PAEK materials: effect of printing direction and artificial aging on Martens parameters. Dent Mater. 2020;36(2):197-209.

Revilla-Leon M, Sadeghpour M, Ozcan M. An update on applications of 3D printing technologies used for processing polymers used in implant dentistry. Odontology. 2020;108(3):331–338.

Zanetti EM, Aldieri A, Terzini M, et al. Additively manufactured custom loadbearing implantable devices. Australasian Med J. 2017;10(8): 694–700.

Lin L, Fang Y, Liao Y, et al. 3D printing and digital processing techniques in dentistry: a review of literature. Adv Eng Mat. 2019;21(6):1801013.

Alharbi N, Alharbi S, Cuijpers V, et al. Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs. J Prosthodont Res. 2018;62(2):218-226.

Jang Y, Sim JY, Park JK, Kim WC, Kim HY, Kim JH. Evaluation of the marginal and internal fit of a single crown fabricated based on a three-dimensional printed model. J Adv Prosthodont. 2018;10(5):367–373.

Bassoli E, Gatto A, Iuliano L, et al. 3D printing technique applied to rapid casting. Rapid Prototyping Journal. 2007;13(3):148–155.

Tack P, Victor J, Gemmel P, et al. 3D-printing techniques in a medical setting: a systematic literature review. Biomed. Eng. Online. 2016;15:115.

Liaw CY, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017;9(2):024102.

Özay M, Sarıdağ S. Diş hekimliğinde fotopolimerizasyon ile 3 boyutlu üretim yöntemleri ve kullanım alanları. Selçuk Dent J. 2023;10(2):479–485. doi:10.15311/selcukdentj.1135010

Giannatsis J, Dedoussis V. Additive fabrication technologies applied to medicine and health care: a review. Int J Adv Manuf Technol. 2009;40(1-2):116–127.

Çelik İ, Karakoç F, Çakır MC, et al. Hızlı prototipleme teknolojileri ve uygulama alanları. Dumlupınar Üniv Fen Bil Ens Derg. 2013;31:53–69.

Kuzu Demir EB, Çaka C, Tuğtekin U, et al. Üç boyutlu yazdırma teknolojilerinin eğitim alanında kullanımı. Türkiye’deki uygulamalar. Ege Eğitim Derg. 2016;17(2):481–503.

Németh A, Vitai V, Czumbel M, et al. Clear guidance to select the most accurate technologies for 3D printing dental models - A network meta-analysis. J Dent. 2023;104532. doi:10.1016/j.jdent.2023.104532.

Della Bona Á, Cantelli V, Britto V, et al.. 3D printing restorative materials using a stereolithographic technique: a systematic review. Dent Mater. 2021;37(2): 336-350. doi:10.1016/j.dental.2020.11.030.

Geng Q, Wang D, Chen P, et al. Ultrafast multifocal 3D nanomanufacturing based on two-photon polymerization. Nature Communications. 2019;10. doi:10.1038/s41467-019-10249-2.

Chaudhary R, Fabbri P, Leoni E, et al. Additive manufacturing by digital light processing: a review. Advances in Additive Manufacturing. 2022;8:331–351. doi:10.1007/s40964-022-00336-0.

Amini A, Guijt R, Themelis T, et al. Recent developments in digital light processing 3D printing techniques for microfluidic analytical devices. J Chromatography. A. 2023;1692:463842. doi:10.1016/j.chroma.2023.463842.

Branco A, Colaço R, Figueiredo-Pina C, et al. Recent advances on 3D-printed zirconia-based dental materials: a review. Materials. 2023;16.doi:10.3390/ma16051860.

Batista M, Mora-Jimenez J, Salguero J, et al. Assessment of development performance of additive manufacturing VPP parts using digital light processing (DLP) and liquid crystal display (LCD) technologies. Appl Sci. 2024;14(9):3607. doi:10.3390/app14093607.

Shafique H, Karamzadeh V, Kim G, et al. High resolution, low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices. Lab on a Chip. 2024. doi: 10.1039/d3lc01125a.

Janusziewicz R, Tumbleston J, Quintanilla A, et al. Layerless fabrication with continuous liquid interface production. Proceedings of the National Academy of Sciences. 2016;113:11703–11708. doi:10.1073/pnas.1605271113.

Lee B, Hsiao K, Lipkowitz G, et al. Characterization and enhancement of a CLIP-based 3D printer with 30 µm pixel size through dynamic print optimization. Additive Manufacturing. 2022;55:102800. doi:10.1016/j.addma.2022.102800.

Kristiawan R, Imaduddin F, Ariawan D, et al. A review on fused deposition modeling (FDM) 3D printing: filament processing, materials and printing parameters. Open Eng. 2021;11:639–649. doi:10.1515/eng-2021-0063.

Acierno D, Patti A. Fused deposition modeling (FDM) of thermoplastic-based filaments: processing and rheological properties - an overview. Materials. 2023;16(24):7664. doi:10.3390/ma16247664.

Shi J, Cagney N, Tatum J, et al. Jetting and droplet formation of particle-laden fluids. Physics of Fluids. 2024. doi:10.1063/5.0180014.

Elkaseer A, Chen K, Janhsen J, et al. Material jetting for advanced applications: state-of-the-art review, deficiencies, and future directions. Additive Manufacturing. 2022;103270. doi:10.1016/j.addma.2022.103270.

Yuan J, Chen C, Yao D, et al. 3D printing of oil paintings based on material jetting and reduction of staircase effect. Polymers. 2020;12(11):2536. doi:10.3390/polym12112536.

Yap C, Chua C, Dong Z, et al. Review of selective laser melting: materials and applications. Applied Physics Reviews. 2015;2:041101. doi:10.1063/1.4935926.

Thakkar R, Jara M, Swinnea S, et al. Impact of laser speed and drug particle size on selective laser sintering 3D printing of amorphous solid dispersions. Pharmaceutics. 2021;13(8):1149. doi:10.3390/pharmaceutics13081149.

Kozak J, Zakrzewski T, Witt M, et al. Selected problems of additive manufacturing using SLS/SLM processes. Transactions on Aerospace Research. 2021;24–44. doi:10.2478/tar-2021-0003.

Revilla-León M, Özcan M. Additive manufacturing technologies used for 3D metal printing in dentistry. Current Oral Health Reports. 2017;4:201–208. doi:10.1007/s40496-017-0152-0.

Dobrzański L, Dobrzański L, Achtelik-Franczak A, et al. Application solid laser-sintered or machined Ti6Al4V alloy in manufacturing of dental implants and dental prosthetic restorations according to dentistry 4.0 concept. Processes. 2020;8(6):664. doi:10.3390/pr8060664.

Attaran M. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Business Horizons. 2017;60:677–688. doi:10.1016/j.bushor.2017.05.011.

Harada Y, Ishida Y, Miura D, et al. Mechanical properties of selective laser sintering pure titanium and Ti-6Al-4V, and its anisotropy. Materials. 2020;13. doi:10.3390/ma13225081

Hitzler L, Alifui-Segbaya F, Williams P, et al. Additive manufacturing of cobalt-based dental alloys: analysis of microstructure and physicomechanical properties. Adv. Mat Sci Eng.2018;8213023. doi:10.1155/2018/8213023.

Ucar Y, Akova T, Akyil MS, et al. Yeni bir diş kronu üretim tekniği kullanılarak hazırlanan kronların iç uyum değerlendirmesi: lazer sinterlenmiş Co-Cr kronlar. J Prosthet Dent. 2009;102:253–259.

Revilla-León M, Ceballos L, Martínez-Klemm I, et al. Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. J Prosthet Dent. 2018;120:942–947.

Ligon S, Liska R, Stampfl J, et al. Polymers for 3D printing and customized additive manufacturing. Chemical Reviews. 2017;117:10212-10290. doi:10.1021/acs.chemrev.7b00074.

Rashid A, Khan S, Al‐Ghamdi S, et al. Additive manufacturing of polymer nanocomposites: needs and challenges in materials, processes, and applications. J Mat Res Tech. 2021;14:910-941. doi:10.1016/j.jmrt.2021.07.016.

Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B Eng. 2018;143:172–196.

Wang X, Jiang M, Zhou Z, Gou J, Hui D. 3D printing of polymer matrix composites: a review and prospective. Compos B Eng. 2017;110:442–458.

Quan C, Han B, Hou Z, et al. 3D printed continuous fiber reinforced composite auxetic honeycomb structures. Compos B Eng. 2020;187:107858.

Pal A, Mohanty A, Misra M, et al. Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective. RSC Advances. 2021;11:36398-36438. doi:10.1039/d1ra04060j

Kuo CC, Liu LC, Teng WF, et al. Preparation of starch/acrylonitrile-butadienestyrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications. Compos B Eng. 2016;86:36-39.

Galante R, Figueiredo-Pina CG, Serro AP. Additive manufacturing of ceramics for dental applications: a review. Dent Mater. 2019;35:825–846.

Senatov FS, Niaza KV, Zadorozhnyy MY, et al. Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds. J Mech Behav Biomed Mater. 2016; 57:139-148.

Chen J, Zhang Z, Chen X, et al. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology. J Prosthet Dent. 2014; 112:1088-1095.e1.

Jindal SK, Sherriff M, Waters MG, et al. Development of a 3D printable maxillofacial silicone: Part II. Optimization of moderator and thixotropic agent. J Prosthet Dent. 2018; 119:299-304.

Bengisu M. Engineering ceramics. Springer Science & Business Media; 2013. p. 104–136.

Chen Z, Li Z, Li J, et al. 3D printing of ceramics: A review. J Eur Ceram Soc. 2019; 39:661-687.

Marcus HL, Beaman JJ, Barlow JW, et al. Solid freeform fabrication-powder processing. Am Ceram Soc Bull. 1990; 69:1030-1031.

Sachs E, Cima M, Cornie J. Three-dimensional printing: rapid tooling and prototypes directly from a CAD model. CIRP annals 1990; 39:201-204.

Travitzky N, Bonet A, Dermeik B, et al. Additive manufacturing of ceramic-based materials. Adv Eng Mater. 2014;16: 729-754.

Pfaffinger M, Mitteramskogler G, Gmeiner R, et al. Thermal debinding of ceramic-filled photopolymers. Mater Sci Forum. 2015;825: 75-81.

Al-Sanabani F, Madfa A, Al-Qudaimi N. Alumina ceramic for dental applications: A review article. Am J Mater Sci. 2014;1: 26-34.

Mao L, Kaizer MR, Zhao M, et al. Graded Ultra-Translucent Zirconia (5Y-PSZ) for strength and functionalities. J Dent Res.2018;97: 1222-1228.

Gracis S, Thompson VP, Ferencz JL, et al. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont. 2015;28: 227-235.

Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res. 2018;97: 140-147.

Josset Y, Oum’Hamed Z, Zarrinpour A, et al. In vitro reactions of human osteoblasts in culture with zirconia and alumina ceramics. J Biomed Mater Res. 1999;47: 481-493.

Özkol E, Zhang W, Ebert J, et al. Potentials of the “Direct Inkjet Printing” method for Manufacturing 3Y-TZP based dental restorations. J Eur Ceram Soc. 2012;32: 2193-2201.

Lian Q, Sui W, Wu X, et al. Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography. Rapid Prototyp J. 2018;24: 114-119.

Cheng YC, Lin DH, Jiang CP, et al. Dental implant customization using numerical optimization design and 3- dimensional printing fabrication of zirconia ceramic. Int J Numer Method Biomed Eng. 2017;33: e2820.

Anssari Moin D, Hassan B, Wismeijer D. A novel approach for custom three-dimensional printing of a zirconia root analogue implant by digital light processing. Clin Oral Implants Res. 2017;28: 668-670.

Maleksaeedi S, Eng H, Wiria F, et al. Property enhancement of 3D-printed alumina ceramics using vacuum infiltration. J Mater Process Technol. 2014;214: 1301-1306.

Uçar Y, Aysan Meriç İ, Ekren O. Layered manufacturing of dental ceramics: fracture mechanics, microstructure, and elemental composition of lithography-sintered ceramic. J Prosthodont. 2019;28: e310-e318.

Abdeen L, Chen Y, Kostagianni A, et al. Prosthesis accuracy of fit on 3D-printed casts versus stone casts: A comparative study in the anterior maxilla. J Esthet Restor Dent. 2022;34: 1238-1246.

Sim JY, Jang Y, Kim WC, et al. Comparing the accuracy (trueness and precision) of models of fixed dental prostheses fabricated by digital and conventional workflows. J Prosthodont Res. 2019;63: 25-30.

Tahayeri A, Morgan MC, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater. 2018;34: 192-200.

Wang W, Yu H, Liu Y, et al. Trueness analysis of zirconia crowns fabricated with 3-dimensional printing. J Prosthet Dent. 2019;121: 285-291.

Koutsoukis T, Zinelis S, Eliades G, et al.. Selective laser melting technique of Co-Cr dental alloys: A review of structure and properties and comparative analysis with other available techniques. J Prosthodont. 2015;24: 303-312.

Presotto AGC, Barao VAR, Bhering CLB, et al. Dimensional precision of implant-supported frameworks fabricated by 3D printing. J Prosthet Dent. 2019;122: 38-45.

Bartikian M, Ferreira A, Gonçalves-Ferreira A, et al. 3D printing anatomical models of head bones. Surg Radiol Ana. 2019;41: 1205-1209.

Xia J, Ip HH, Samman N, et al. Computer-assisted three-dimensional surgical planning and simulation: 3D virtual osteotomy. Int J Oral Maxillofac Surg. 2000;29: 11-17.

Alshawaf B, Weber HP, Finkelman M, et al. Accuracy of printed casts generated from digital implant impressions versus stone casts from conventional implant impressions: A comparative in vitro study. Clin Oral Implants Res. 2018;28: 835-842.

Rokhshad R, Tehrani AM, Zarbakhsh A, et al. Influence of fabrication method on the manufacturing accuracy and internal discrepancy of removable partial dentures: A systematic review and meta-analysis. J Prosthet Dent. 2023;133: 724-735.

Chen J, Ahmad R, Suenaga H, et al. Shape optimization for additive manufacturing of removable partial dentures A new paradigm for prosthetic CAD/CAM. PLoS One. 2015;10: e0132552.

Maeda Y, Minoura M, Tsutsumi S, et al. A CAD/CAM system for removable denture. Part I: fabrication of complete dentures. Int J Prosthodont. 1994;7(1): 17–21.

Baba NZ, AlRumaih HS, Goodacre BJ, et al. Current techniques in CAD/CAM denture fabrication. Gen Dent. 2016;64: 23-28.

Steinmassl O, Dumfahrt H, Grunert I, et al. CAD/CAM produces dentures with improved fit. Clin Oral Investig. 2018;22: 2829-2835.

Kalberer N, Mehl A, Schimmel M, et al. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness. J Prosthet Dent. 2019;121: 637-643.

Lin WS, Harris BT, Pellerito J, et al. Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing threedimensional printer: A proof-of-concept technique. J Prosthet Dent. 2018;120: 331-334.

Unkovskiy A, Schmidt F, Beuer F, et al. Stereolithography vs. direct light processing for rapid manufacturing of complete denture bases: an in vitro accuracy analysis. J Clin Med. 2021;10: 1070.

Salmi M, Paloheimo KS, Tuomi J, et al. A digital process for additive manufacturing of occlusal splints: a clinical pilot study. J R Soc Interface. 2013;10: 20130203.

Lutz AM, Hampe R, Roos M, et al. Fracture resistance and 2-body wear of 3-dimensional-printed occlusal devices. J Prosthet Dent. 2019;121: 166-172.

Reyes-Sevilla M, Kuijs RH, Werner A, et al. Comparison of wear between occlusal splint materials and resin composite materials. J Oral Rehabil. 2018;45: 539-544.

Park JM, Ahn JS, Cha HS, et al. Wear resistance of 3D printing resin material opposing zirconia and metal antagonists. Materials (Basel). 2018;11: 1043.

Revilla-Leon M, Sanchez-Rubio JL, Oteo-Calatayud J, et al. Impression technique for a completearch prosthesis with multiple implants using additive manufacturing technologies. J Prosthet Dent. 2017;117: 714-720.

AlShaibani R, Akhtar T, Gentle M, et al. Digital applications of maxillofacial reconstruction– A systematic review. J Adv Dent. 2021;1: 21-27.

de Caxias FP, Dos Santos DM, Bannwart LC, et al. Classification, history, and future prospects of maxillofacial prosthesis. Int J Dent. 2019;1: 8657619.