Pedodontide CAD/CAM Yöntemleri ve Üç Boyutlu Baskı Teknolojileri

Yilmaz H, Aydin MN. Digital versus conventional impression method in children: Comfort, preference and time. International journal of paediatric dentistry. 2019;29(6):728-735. DOI: 10.1111/ipd.12566

Tian Y, Chen C, Xu X, Wang J, Hou X, Li K, et al. A review of 3D printing in dentistry: Technologies, affecting factors, and applications. Scanning. 2021;2021(1):9950131. DOI: 10.1155/2021/9950131

Mangano A, Beretta M, Luongo G, Mangano C, Mangano F. Conventional vs digital impressions: acceptability, treatment comfort and stress among young orthodontic patients. The open dentistry journal. 2018;12:118.

Sikdar R, Bag A, Shirolkar S, Gayen K, Sarkar S, Roychowdhury S. 3D printing: Its application in pediatric dental practice. Acta Scientific Dental Sciences (ISSN: 2581-4893). 2022;6(2):103-111. DOI: 10.31080/ASDS.2022.06.1306

Bartkowiak T, Walkowiak-Śliziuk A. 3D printing technology in orthodontics–review of current applications. Journal of Stomatology. 2018;71(4):356-364. DOI: 10.5114/jos.2018.83410

Tyagi R, Kalra N, Khatri A, Kulood MK, Garg N. Three-dimensional printing: Fine-tuning of the face of pediatric dentistry. SRM Journal of Research in Dental Sciences. 2022;13(1):25-31. DOI: 10.4103/srmjrds.srmjrds_6_22

Vijayavenkataraman S, Fuh JY, Lu WF. 3D printing and 3D bioprinting in pediatrics. Bioengineering. 2017;4(3):63. DOI: 10.3390/bioengineering4030063

Vij AA, Reddy A. Using digital impressions to fabricate space maintainers: A case report. Clinical Case Reports. 2020;8(7):1274-1276.

Pawar BA. Maintenance of space by innovative three-dimensional-printed band and loop space maintainer. Journal of Indian Society of Pedodontics and Preventive Dentistry. 2019;37(2):205-208. DOI: 10.4103/JISPPD.JISPPD_9_19

Guo H, Wang Y, Zhao Y, Liu H. Computer-aided design of polyetheretherketone for application to removable pediatric space maintainers. BMC oral health. 2020;20:1-10.

Rekow ED. Digital dentistry: The new state of the art—Is it disruptive or destructive? Dental Materials. 2020;36(1):9-24.

Cicciù M, Fiorillo L, D’Amico C, Gambino D, Amantia EM, Laino L, et al. 3D digital impression systems compared with traditional techniques in dentistry: a recent data systematic review. Materials. 2020;13(8):1982. DOI: 10.3390/ma13081982

Davidowitz G, Kotick PG. The use of CAD/CAM in dentistry. Dental Clinics of North America. 2011;55(3):559-ix. DOI: 10.1016/j.cden.2011.02.011

Scribante A, Gallo S, Pascadopoli M, Canzi P, Marconi S, Montasser MA, et al. Properties of CAD/CAM 3D printing dental materials and their clinical applications in orthodontics: where are we now? Applied sciences. 2022;12(2):551.

Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. British dental journal. 2008;204(9):505-511. DOI: 10.1038/sj.bdj.2008.350

Kirschneck C, Kamuf B, Putsch C, Chhatwani S, Bizhang M, Danesh G. Conformity, reliability and validity of digital dental models created by clinical intraoral scanning and extraoral plaster model digitization workflows. Computers in biology and medicine. 2018;100:114-122. DOI: 10.1016/j.compbiomed.2018.06.035

Lee K-M. Comparison of two intraoral scanners based on three-dimensional surface analysis. Progress in orthodontics. 2018;19:1-7. DOI: 10.1186/s40510-018-0205-5

Mennito AS, Evans ZP, Nash J, Bocklet C, Lauer A, Bacro T, et al. Evaluation of the trueness and precision of complete arch digital impressions on a human maxilla using seven different intraoral digital impression systems and a laboratory scanner. Journal of Esthetic and Restorative Dentistry. 2019;31(4):369-377.

Sason GK, Mistry G, Tabassum R, Shetty O. A comparative evaluation of intraoral and extraoral digital impressions: An: in vivo: study. The Journal of Indian Prosthodontic Society. 2018;18(2):108-116. DOI: 10.4103/jips.jips_224_17

Ueno D, Kobayashi M, Tanaka K, Watanabe T, Nakamura T, Ueda K, et al. Measurement accuracy of alveolar soft tissue contour using a laboratory laser scanner. Odontology. 2018;106:202-207. DOI: 10.1007/s10266-017-0315-4

Mandelli F, Gherlone E, Gastaldi G, Ferrari M. Evaluation of the accuracy of extraoral laboratory scanners with a single-tooth abutment model: A 3D analysis. Journal of Prosthodontic Research. 2017;61(4):363-370. DOI: 10.1016/j.jpor.2016.09.002

Peng L, Chen L, Harris BT, Bhandari B, Morton D, Lin W-S. Accuracy and reproducibility of virtual edentulous casts created by laboratory impression scan protocols. The Journal of prosthetic dentistry. 2018;120(3):389-395. DOI: 10.1016/j.prosdent.2017.11.024

Merklein M, Junker D, Schaub A, Neubauer F. Hybrid additive manufacturing technologies–an analysis regarding potentials and applications. Physics procedia. 2016;83:549-559. DOI: 10.1016/j.phpro.2016.08.057

Kaur I, Datta K. CEREC-The power of technology. The Journal of Indian Prosthodontic Society. 2006;6(3):115-119. DOI: 10.4103/0972-4052.29360

Phan AC. Bloc composite dentaire thermo-polymérisé sous haute pression favorable pour la CFAO: Université Sorbonne Paris Cité; 2015.

Andersson M, Carlsson L, Persson M, Bergman B. Accuracy of machine milling and spark erosion with a CAD/CAM system. The Journal of prosthetic dentistry. 1996;76(2):187-193. DOI: 10.1016/S0022-3913(96)90305-4

Van Der Zel JM, Vlaar S, de Ruiter WJ, Davidson C. The CICERO system for CAD/CAM fabrication of full-ceramic crowns. The Journal of prosthetic dentistry. 2001;85(3):261-267. DOI: 10.1067/mpr.2001.114399

Volkl L. Das CAM-Vollkeramik-System Von Degussa Dental. Quintessenz Zahntech. 2001;27(9):1004-1008.

Güneş E, Gençay DK. Pedodontide CAD/CAM Sistemlerinin Kullanımı.

Höland W, Schweiger M, Watzke R, Peschke A, Kappert H. Ceramics as biomaterials for dental restoration. Expert review of medical devices. 2008;5(6):729-745. DOI: 10.1586/17434440.5.6.729

Wendler M, Belli R, Petschelt A, Mevec D, Harrer W, Lube T, et al. Chairside CAD/CAM materials. Part 2: Flexural strength testing. Dental Materials. 2017;33(1):99-109. DOI: 10.1016/j.dental.2016.10.008

Li RWK, Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: state of the art. Journal of Prosthodontic Research. 2014;58(4):208-216. DOI: 10.1016/j.jpor.2014.07.003

Fasbinder DJ. Restorative material options for CAD/CAM restorations. Compendium. 2002;23(10):911-922.

Pröbster L, Geis‐Gerstorfer J, Kirchner E, Kanjantra P. In vitro evaluation of a glass–ceramic restorative material. Journal of oral rehabilitation. 1997;24(9):636-645. DOI: 10.1046/j.1365-2842.1997.00560.x

Rosensteil S, Land M, Fujimoto J. Contemporary Fixed Prosthodontics 4th ed St louis. Mosby; 2006,

Bindl A, Lüthy H, Mörmann WH. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dental Materials. 2006;22(1):29-36. DOI: 10.1016/j.dental.2005.02.007

Conrad HJ, Seong W-J, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. The Journal of prosthetic dentistry. 2007;98(5):389-404. DOI: 10.1016/S0022-3913(07)60124-3

Goldberg M, Dimitrova-Nakov S, Schmalz G. BPA from dental resin material: where are we going with restorative and preventive dental biomaterials? : Springer; 2014. p. 347-349 DOI: 10.1007/s00784-013-1153-6.

Magne P, Paranhos MPG, Burnett Jr LH, Magne M, Belser UC. Fatigue resistance and failure mode of novel‐design anterior single‐tooth implant restorations: influence of material selection for type III veneers bonded to zirconia abutments. Clinical oral implants research. 2011;22(2):195-200. DOI: 10.1111/j.1600-0501.2010.02012.x

Griffin Jr JD. Tooth in a bag: same-day monolithic zirconia crown. Dentistry today. 2013;32(1):124-131.

Gueth J-F, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D. Optical properties of manually and CAD/CAM-fabricated polymers. Dental materials journal. 2013;32(6):865-871. DOI: 10.4012/dmj.2013-099

Georgieva M, Dimitrov E, Andreeva R, Nikolova T, Borisov B, Sabeva E. Use of CAD/CAM technologies in pediatric dentistry. Scripta Scientifica Medicinae Dentalis. 2017;3(2):23-28. DOI: 10.14748/ssmd.v3i2.4306

Coşkun A, Yaluğ S. Metal desteksiz porselen sistemleri. Cumhuriyet Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2002;5(2):97-102.

Skorulska A, Piszko P, Rybak Z, Szymonowicz M, Dobrzyński M. Review on polymer, ceramic and composite materials for cad/cam indirect restorations in dentistry—Application, mechanical characteristics and comparison. Materials. 2021;14(7):1592. DOI: 10.3390/ma14071592

Yilmaz A, Ozdemir C, Yilmaz Y. A delayed hypersensitivity reaction to a stainless steel crown: a case report. Journal of Clinical Pediatric Dentistry. 2012;36(3):235-238.

Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. The Journal of prosthetic dentistry. 2002;88(1):10-15. DOI: 10.1067/mpr.2002.126795

Tiwari S, Parimala Kulkarni DSVR, Abraham JM, Agrawal N, Kumar A. 3D printing: A silver lining in pediatric dentistry. NVEO-NATURAL VOLATILES & ESSENTIAL OILS Journal| NVEO. 2021:11582-11591.

Christensen GJ. Computerized restorative dentistry: state of the art. The Journal of the American Dental Association. 2001;132(9):1301-1303. DOI: 10.14219/jada.archive.2001.0377

Helpin M. The open-face steel crown restoration in children. ASDC journal of dentistry for children. 1983;50(1):34-38.

Fuks A, Ram D, Eidelman E. Clinical performance of esthetic posterior crowns in primary molars: a pilot study. Pediatric Dentistry. 1999;21(7):445-448.

Gaurav G, Gupta R, Priyanka G, Neelja G. Digital impressions and immediate chairside zirconia crowns in paediatric dentistry: A case report. Inter Ped Dent Open Acc J. 2021;5:443-446. DOI: 10.32474/IPDOAJ.2021.05.000216

Mourouzis P, Arhakis A, Tolidis K. Computer-aided Design and Manufacturing Crown on Primary Molars: An Innovative Case Report. Int J Clin Pediatr Dent. 2019;12(1):76-79. DOI: 10.5005/jp-journals-10005-1591

Noirrit E, Chabreron O, Nasr K, Esclassan R. A contribution of CAD/CAM treatment of a dental trauma in a special care patient. Spec Care Dentist. 2018;38(1):55-57. DOI: 10.1111/scd.12261

Dursun E, Monnier-Da Costa A, Moussally C. Chairside CAD/CAM Composite Onlays for the Restoration Of Primary Molars. J Clin Pediatr Dent. 2018;42(5):349-354. DOI: 10.17796/1053-4625-42.5.5

Millet C, Ducret M, Khoury C, Virard F. Monolithic CAD/CAM Complete Overdentures for a Pedodontic Patient with Dentinogenesis Imperfecta and Limited Prosthetic Space: A Clinical Report. Int J Prosthodont. 2020;33(3):341-346. DOI: 10.11607/ijp.6563

Halal R, Nohra J, Akel H. Conservative anterior treatment with CAD-CAM technology and polymer-infiltrated ceramic for a child with amelogenesis imperfecta: A 2-year follow-up. The Journal of prosthetic dentistry. 2018;119(5):710-712.

Ierardo G, Luzzi V, Lesti M, Vozza I, Brugnoletti O, Polimeni A, et al. Peek polymer in orthodontics: A pilot study on children. Journal of clinical and experimental dentistry. 2017;9(10):e1271. DOI: 10.4317/jced.54010

Mangano A, Beretta M, Luongo G, Mangano C, Mangano F. Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients. Open Dent J. 2018;12(2):118-124. DOI: 10.2174/1874210601812010118

Roser C, Hodecker LD, Koebel C, Lux CJ, Ruckes D, Rues S, et al. Mechanical properties of CAD/CAM-fabricated in comparison to conventionally fabricated functional regulator 3 appliances. Scientific Reports. 2021;11(1):14719.

Sánchez-Riofrío D, Viñas MJ, Ustrell-Torrent JM. CBCT and CAD-CAM technology to design a minimally invasive maxillary expander. BMC oral health. 2020;20:1-7.

Patel J, Winters J, Walters M. Intraoral Digital Impression Technique for a Neonate With Bilateral Cleft Lip and Palate. Cleft Palate Craniofac J. 2019;56(8):1120-1123. DOI: 10.1177/1055665619835082

Kapoor A, Gupta R, Sikri A, Nagaraj A, Sikri J. 3D printed obturators-An innovative journey. Journal of Family Medicine and Primary Care. 2021;10(12):4594-4597.

Abreu A, Lima MH, Hatten E, Klein L, Levy-Bercowski D. Intraoral digital impression for speech aid/obturator in children: report of 2 Cases. The Cleft Palate-Craniofacial Journal. 2022;59(2):262-267. DOI: 10.1177/10556656211002686

Marcel R, Reinhard H, Andreas K. Accuracy of CAD/CAM-fabricated bite splints: milling vs 3D printing. Clinical oral investigations. 2020;24:4607-4615. DOI: 10.1007/s00784-020-03329-x

Marty M, Broutin A, Vergnes JN, Vaysse F. Comparison of student’s perceptions between 3D printed models versus series models in paediatric dentistry hands‐on session. European Journal of Dental Education. 2019;23(1):68-72. DOI: 10.1111/eje.12404

Lopez CD, Witek L, Torroni A, Flores RL, Demissie DB, Young S, et al. The role of 3D printing in treating craniomaxillofacial congenital anomalies. Birth Defects Resarch. 2018;110(13):1055-1064. DOI: 10.1002/bdr2.1345

Khan MK. Modern digital pediatric dentistry with the advent of intraoral sensors, computer-aided design/computer-aided manufacturing, and three-dimensional printing technologies: A comprehensive review. Journal of Dental Research and Review. 2022;9(3):195-201. DOI: 10.4103/jdrr.jdrr_83_22