Isıl İşlem Görmüş Niti Eğe Sistemleri

Thompson S. An overview of nickel–titanium alloys used in dentistry. International endodontic journal. 2000;33(4):297-310.

Walia H, Brantley WA, Gerstein H. An initial investigation of the bending and torsional properties of Nitinol root canal files. Journal of endodontics. 1988;14(7):346-51.

CR G. A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instruments. J Endod. 1995;21:146-51.

Liu Y, McCormick P. Thermodynamic analysis of the martensitic transformation in NiTi—I. Effect of heat treatment on transformation behaviour. Acta metallurgica et materialia. 1994;42(7):2401-6.

Auricchio F, Taylor RL, Lubliner J. Shape-memory alloys: macromodelling and numerical simulations of the superelastic behavior. Computer methods in applied mechanics and engineering. 1997;146(3-4):281-312.

Andreasen GF, Hilleman TB. An evaluation of 55 cobalt substituted Nitinol wire for use in orthodontics. The journal of the American dental association. 1971;82(6):1373-5.

Civjan S, Huget EF, DeSimon LB. Potential applications of certain nickel-titanium (nitinol) alloys. Journal of dental research. 1975;54(1):89-96.

Peters OA, Barbakow F, Peters CI. An analysis of endodontic treatment with three nickel‐titanium rotary root canal preparation techniques. International endodontic journal. 2004;37(12):849-59.

Schäfer E, Vlassis M. Comparative investigation of two rotary nickel–titanium instruments: ProTaper versus RaCe. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth. International endodontic journal. 2004;37(4):239-48.

Ye J, Gao Y. Metallurgical characterization of M-Wire nickel-titanium shape memory alloy used for endodontic rotary instruments during low-cycle fatigue. Journal of endodontics. 2012;38(1):105-7.

Yared G. Canal preparation using only one Ni‐Ti rotary instrument: preliminary observations. International endodontic journal. 2008;41(4):339-44.

Hashem AAR, Ghoneim AG, Lutfy RA, Foda MY, Omar GAF. Geometric analysis of root canals prepared by four rotary NiTi shaping systems. Journal of endodontics. 2012;38(7):996-1000.

Haapasalo M, Shen Y. Evolution of nickel–titanium instruments: from past to future. Endodontic topics. 2013;29(1):3-17.

Brantley WA. Introduction of nickel-titanium alloy to endodontics. Ingle's endodontics. 2008;6:800-13.

Yoneyama T, Kobayashi C. Endodontic instruments for root canal treatment using Ti–Ni shape memory alloys. Shape memory alloys for biomedical applications: Elsevier; 2009. p. 297-305.

Shen Y, Zhou H-m, Zheng Y-f, Peng B, Haapasalo M. Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments. Journal of endodontics. 2013;39(2):163-72.

Zhou H, Peng B, Zheng YF. An overview of the mechanical properties of nickel–titanium endodontic instruments. Endodontic topics. 2013;29(1):42-54.

Gambarini G, Grande NM, Plotino G, Somma F, Garala M, De Luca M, et al. Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods. Journal of endodontics. 2008;34(8):1003-5.

Grande N, Castagnola R, Minciacchi I, Marigo L, Plotino G. A review of the latest developments in rotary NiTi technology and root canal preparation. Australian Dental Journal. 2023;68:S24-S38.

Alapati SB, Brantley WA, Iijima M, Clark WA, Kovarik L, Buie C, et al. Metallurgical characterization of a new nickel-titanium wire for rotary endodontic instruments. Journal of endodontics. 2009;35(11):1589-93.

Shen Y, Zhou H-m, Zheng Y-f, Campbell L, Peng B, Haapasalo M. Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments. Journal of endodontics. 2011;37(11):1566-71.

Pereira E, Peixoto I, Viana A, Oliveira I, Gonzalez B, Buono V, et al. Physical and mechanical properties of a thermomechanically treated NiTi wire used in the manufacture of rotary endodontic instruments. International endodontic journal. 2012;45(5):469-74.

Braga LCM, Silva ACF, Buono VTL, de Azevedo Bahia MG. Impact of heat treatments on the fatigue resistance of different rotary nickel-titanium instruments. Journal of endodontics. 2014;40(9):1494-7.

Johnson E, Lloyd A, Kuttler S, Namerow K. Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/. 04 rotary instruments. Journal of endodontics. 2008;34(11):1406-9.

Montalvão D, Alçada FS. Numeric comparison of the static mechanical behavior between ProFile GT and ProFile GT series X rotary nickel-titanium files. Journal of Endodontics. 2011;37(8):1158-61.

Gao Y, Gutmann JL, Wilkinson K, Maxwell R, Ammon D. Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile Vortex rotary instruments. Journal of endodontics. 2012;38(3):398-401.

Pereira ES, Gomes RO, Leroy AM, Singh R, Peters OA, Bahia MG, et al. Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments. Dental Materials. 2013;29(12):e318-e24.

Zupanc J, Vahdat‐Pajouh N, Schäfer E. New thermomechanically treated NiTi alloys–a review. International endodontic journal. 2018;51(10):1088-103.

Kramkowski TR, Bahcall J. An in vitro comparison of torsional stress and cyclic fatigue resistance of ProFile GT and ProFile GT Series X rotary nickel-titanium files. Journal of endodontics. 2009;35(3):404-7.

Larsen CM, Watanabe I, Glickman GN, He J. Cyclic fatigue analysis of a new generation of nickel titanium rotary instruments. Journal of endodontics. 2009;35(3):401-3.

Gao Y, Shotton V, Wilkinson K, Phillips G, Johnson WB. Effects of raw material and rotational speed on the cyclic fatigue of ProFile Vortex rotary instruments. Journal of endodontics. 2010;36(7):1205-9.

Available from: http://www.scribd.com/doc/35935026/GT-Series-X- Brochure. (Accessed 15th January 2025)

Webber J, Machtou P, Pertot W, Kuttler S, Ruddle C, West J. The WaveOne single-file reciprocating system. Roots. 2011;1(1):28-33.

Gavini G, Caldeira CL, Akisue E, de Miranda Candeiro GT, Kawakami DAS. Resistance to flexural fatigue of Reciproc R25 files under continuous rotation and reciprocating movement. Journal of Endodontics. 2012;38(5):684-7.

Bürklein S, Hinschitza K, Dammaschke T, Schäfer E. Shaping ability and cleaning effectiveness of two single‐file systems in severely curved root canals of extracted teeth: Reciproc and WaveOne versus Mtwo and ProTaper. International endodontic journal. 2012;45(5):449-61.

Berutti E, Chiandussi G, Paolino DS, Scotti N, Cantatore G, Castellucci A, et al. Canal shaping with WaveOne Primary reciprocating files and ProTaper system: a comparative study. Journal of endodontics. 2012;38(4):505-9.

Plotino G, Grande N, Testarelli L, Gambarini G. Cyclic fatigue of Reciproc and WaveOne reciprocating instruments. International Endodontic Journal. 2012;45(7):614-8.

Brantley WA. Orthodontic wires. Orthodontic materials: scientific and clinical aspects Stuttgart: Thieme. 2001:77-103.

Available from: https://assets.dentsplysirona.com/dentsply/web/Endodontics/global-page-templatesassets/downloadpdf%27s/protapernext/PTN%20Brochure%20ROW%20EN.pdf (Accessed 15th January 2025)

Hou X, Yahata Y, Hayashi Y, Ebihara A, Hanawa T, Suda H. Phase transformation behaviour and bending property of twisted nickel–titanium endodontic instruments. International endodontic journal. 2011;44(3):253-8.

Gambarini G, Gerosa R, De Luca M, Garala M, Testarelli L. Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 2008;105(6):798-800.

El Batouty KM, Elmallah WE. Comparison of canal transportation and changes in canal curvature of two nickel-titanium rotary instruments. Journal of endodontics. 2011;37(9):1290-2.

Bouska J, Justman B, Williamson A, DeLong C, Qian F. Resistance to cyclic fatigue failure of a new endodontic rotary file. Journal of endodontics. 2012;38(5):667-9.

Casper RB, Roberts HW, Roberts MD, Himel VT, Bergeron BE. Comparison of autoclaving effects on torsional deformation and fracture resistance of three innovative endodontic file systems. Journal of Endodontics. 2011;37(11):1572-5.

Wu S-K, Lin H, Chou T. A study of electrical resistivity, internal friction and shear modulus on an aged Ti49Ni51 alloy. Acta Metallurgica et Materialia. 1990;38(1):95-102.

Liaw Y-C, Su Y-YM, Lai Y-L, Lee S-Y. Stiffness and frictional resistance of a superelastic nickel-titanium orthodontic wire with low-stress hysteresis. American Journal of Orthodontics and Dentofacial Orthopedics. 2007;131(5):578. e12-. e18.

Available from: Available from: https://www.primedentalsupply.com/mwdownloads/download/link/id/3720. (Accessed 15 th January 2025)

Gutmann J, Gao Y. Alteration in the inherent metallic and surface properties of nickel–titanium root canal instruments to enhance performance, durability and safety: a focused review. International endodontic journal. 2012;45(2):113-28.

Available from: https://www.kerrdental.com/en-fi/endodontics-products/k3xf-endodontic-shaping. (Accessed 15 th January 2025)

Shen Y, Zhou H-m, Wang Z, Campbell L, Zheng Y-f, Haapasalo M. Phase transformation behavior and mechanical properties of thermomechanically treated K3XF nickel-titanium instruments. Journal of endodontics. 2013;39(7):919-23.

Ammon D, Shotton V, Gao Y, Maxwell R. Endodontic instruments and methods of manufacturing thereof. Google Patents; 2014.

McKelvey A, Ritchie R. Fatigue-crack growth behavior in the superelastic and shape-memory alloy Nitinol. Metallurgical and Materials Transactions A. 2001;32:731-43.

Zhou H-m, Shen Y, Zheng W, Li L, Zheng Y-f, Haapasalo M. Mechanical properties of controlled memory and superelastic nickel-titanium wires used in the manufacture of rotary endodontic instruments. Journal of endodontics. 2012;38(11):1535-40.

Available from: Hyflex, http://www. hyflex.info/fileadmin/dam/DATEN/HyFlex-CM/down loads/allgemein/6846_05-13_HyFlex_CM_EN.pdf. (Accessed 15 th January 2025)

Shen Y, Coil J, Zhou H, Zheng Y, Haapasalo M. H y F lex nickel–titanium rotary instruments after clinical use: metallurgical properties. International endodontic journal. 2013;46(8):720-9.

Iacono F, Pirani C, Generali L, Bolelli G, Sassatelli P, Lusvarghi L, et al. Structural analysis of HyFlex EDM instruments. International endodontic journal. 2017;50(3):303-13.

Testarelli L, Plotino G, Al-Sudani D, Vincenzi V, Giansiracusa A, Grande NM, et al. Bending properties of a new nickel-titanium alloy with a lower percent by weight of nickel. Journal of endodontics. 2011;37(9):1293-5.

Morgental RD, Vier-Pelisser FV, Kopper PMP, De Figueiredo JAP, Peters OA. Cutting efficiency of conventional and martensitic nickel-titanium instruments for coronal flaring. Journal of endodontics. 2013;39(12):1634-8.

Shen Y, Qian W, Abtin H, Gao Y, Haapasalo M. Fatigue testing of controlled memory wire nickel-titanium rotary instruments. Journal of endodontics. 2011;37(7):997-1001.

Caicedo R, Clark S. HyFlex CM rotary files: an excellent innovation for endodontic treatment. Endod Pract. 2012;4:10-7.

Bardsley S, Peters CI, Peters OA. The effect of three rotational speed settings on torque and apical force with vortex rotary instruments in vitro. Journal of endodontics. 2011;37(6):860-4.

Available from:https://products.coltene.com/EN/CH/products/endodontics/shapingfiles/rotary/hyflex-cm. (Accessed 15 th January 2025)

Available from:www. hyflexcm.com/DevDownloads/30464A_HYFLEX-CM_bro.pdf. (Accessed 15 th January 2025)

Available from:(https://www.clinicianschoice.com/marketing/CCI-Typhoon-ProductSheet-Intl.pdf. (Accessed 15 th January 2025)

Available from:https://www.clinicianschoice.com/marketing/CCI-Typhoon-ProductSheet-Intl.pdf. (Accessed 15 th January 2025)

Plotino G, Grande NM, Cotti E, Testarelli L, Gambarini G. Blue treatment enhances cyclic fatigue resistance of Vortex nickel-titanium rotary files. Journal of endodontics. 2014;40(9):1451-3.

Pereira ÉSJ, Viana ACD, Buono VTL, Peters OA, de Azevedo Bahia MG. Behavior of nickel-titanium instruments manufactured with different thermal treatments. Journal of endodontics. 2015;41(1):67-71.

Hieawy A, Haapasalo M, Zhou H, Wang Z-j, Shen Y. Phase transformation behavior and resistance to bending and cyclic fatigue of ProTaper Gold and ProTaper Universal instruments. Journal of endodontics. 2015;41(7):1134-8.

Elnaghy AM, Elsaka SE. Shaping ability of ProTaper Gold and ProTaper Universal files by using cone-beam computed tomography. Indian Journal of Dental Research. 2016;27(1):37-41.

Kaval ME, Capar ID, Ertas H. Evaluation of the cyclic fatigue and torsional resistance of novel nickel-titanium rotary files with various alloy properties. Journal of endodontics. 2016;42(12):1840-3.

Vasconcelos R, Arias A, Peters OA. Lateral and axial cutting efficiency of instruments manufactured with conventional nickel‐titanium and novel gold metallurgy. International endodontic journal. 2018;51(5):577-83.

Türkyılmaz A, Çetin EM. Endodontide Blue-wire ve Gold-wire Teknolojisi ile Üretilen Yeni Nesil Nikel Titanyum Eğeler. Necmettin Erbakan Üniversitesi Diş Hekimliği Dergisi.4(1):30-7.

Hu W, Whitten B, Sedgley C, Svec T. Effect of three NiTi files on transportation of the apical foramen. International Endodontic Journal. 2014;47(11):1064-71.

Shen Y, Zhou H, Coil JM, Aljazaeri B, Buttar R, Wang Z, et al. ProFile Vortex and Vortex Blue nickel-titanium rotary instruments after clinical use. Journal of endodontics. 2015;41(6):937-42.

Available from: https://www.vdwdental.com/en/products/detail/reciproc-blue/.(Accessed 15 th January 2025)

Available from: https://www.dentaladres.com/urun/vdw-reciproc-blue. (Accessed 15 th January 2025)

Available from: https://www.barisdental.com/urun/reciproc-blue-rotary-kanal-egesi-6li-blister#:~:text=RECIPROC%20mavi%20dosyaları%2C%20yenilikçi%20bir,Titanyum%20(NiTi)%20ile%20üretilmektedir. (Accessed 15 th January 2025)

Available from: protaper gold broşür. https://www.dentsply.com/ content/dam/dentsply/pim/manufacturer/Endo- dontics/Glide_Path__Shaping/Rotary__Reciprocating_Files/Shaping/ProTaper_Gold_Rotary_File. (Accessed 15 th January 2025)

Blum J, Machtou P, Ruddle C, Micallef J. Analysis of mechanical preparations in extracted teeth using ProTaper rotary instruments: value of the safety quotient. Journal of endodontics. 2003;29(9):567-75.

Berutti E, Negro AR, Lendini M, Pasqualini D. Influence of manual preflaring and torque on the failure rate of ProTaper rotary instruments. Journal of endodontics. 2004;30(4):228-30.

Available from: https://www.dentsply.com/ content/dam/dentsply/pim/manufacturer/Endo- dontics/Glide_Path__Shaping/Rotary__Reciprocating_Files/Shaping/ProTaper_Gold_Rotary_File. (Accessed 15 th January 2025)

Ruddle CJ. Single-file shaping technique: achieving a gold medal result. Dent Today. 2016;35(1):98-101.

Alcalde MP, Duarte MAH, Bramante CM, de Vasconselos BC, Tanomaru-Filho M, Guerreiro-Tanomaru JM, et al. Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments. Clinical oral investigations. 2018;22:1865-71.

Van der Vyver PJ, Vorster M. WaveOne® Gold reciprocating instruments: clinical application in the private practice: Part 1. 2017.

Webber J. Shaping canals with confidence: WaveOne GOLD single-file reciprocating system. Roots. 2015;1(3):34-40.

Adıgüzel M, Capar ID. Comparison of cyclic fatigue resistance of WaveOne and WaveOne Gold small, primary, and large instruments. Journal of endodontics. 2017;43(4):623-7.

Plotino G, Ahmed HMA, Grande NM, Cohen S, Bukiet F. Current assessment of reciprocation in endodontic preparation: a comprehensive review—part II: properties and effectiveness. Journal of endodontics. 2015;41(12):1939-50.

de Menezes SEAC, Batista SM, Lira JOP, de Melo Monteiro GQ. Cyclic fatigue resistance of WaveOne Gold, ProDesign R and ProDesign Logic files in curved canals in vitro. Iranian endodontic journal. 2017;12(4):468.

Bronnec F, Bouillaguet S, Machtou P. Ex vivo assessment of irrigant penetration and renewal during the final irrigation regimen. International endodontic journal. 2010;43(8):663-72.

Available from: END-scientific-information-ProTaper-Ultimate-FactFile.pdf. (Accessed 15 th January 2025)

Available from: https://www.dentrealmarket.com/urun/mailefer-trunatomy-rotary-kanal-egesi-sequance. (Accessed 15 th January 2025)

Available from: END-Scientific-infomation-TruNatomy-Scientific-Manual.pdf. (Accessed 15 th January 2025)

Available from: https://www.dentsplysirona.com/en-us/discover/discover-by-brand/trunatomy/trunatomy-endodontic-files.html. (Accessed 15 th January 2025)

Gavini G, Santos Md, Caldeira CL, Machado MEdL, Freire LG, Iglecias EF, et al. Nickel–titanium instruments in endodontics: a concise review of the state of the art. Brazilian oral research. 2018;32:e67.

Available from: XP-endo Finisher, http://www.fkg. (Accessed 15 th January 2025)

ch/sites/default/files/201610_fkg_xp_endo_finisher_b rochure_v2_en_web_0.pdf.

Ustun Y, Aslan T, Sagsen B, Kesim B. The effects of different nickel-titanium instruments on dentinal microcrack formations during root canal preparation. European journal of dentistry. 2015;9(01):041-6.

Available from: https://www.fkg.ch/xpendo/shaper. (Accessed 15 th January 2025)

Available from: https://www.dme-medical.com/fkg-xp-endor-shaper.html. (Accessed 15 th January 2025)

Available from: https://www.dme-medical.com/fkg-xp-endo-finisher.html. (Accessed 15 th January 2025)

Available from: https://www.schottlander.com/product/endodontics/xp-endo-solutions/xp-endo-finisher-retreatment. (Accessed 15 th January 2025)

Available from: https://www.fkg.ch/xpendo/retreatment. (Accessed 15 th January 2025)

Available from: https://www.dentaltix.com/en/fkg-xp-endo-finisher-r-retreatment-file-3-pcs?srsltid=AfmBOoqPh3QqY35GW38EFvsUsPtwyztk0QENYsjWC_v_DpVctcziNid9. (Accessed 15 th January 2025)

Available from: https://www.fkg.ch/products/endodontics/canal-shaping-and-cleaning/xp-endo-rise. (Accessed 15 th January 2025)