Kompozit Rezinlerin Yüzey Özellikleri: Bileşenlerden Polisaj Materyallerine İdeal Materyal Arayışı
Özet
Referanslar
Garg, N. ve Garg, A. Textbook of Operative Dentistry. New Delhi: Jaypee Brothers Medical Publishers; 2010.
Ünlü N. ve Çetin AR. Kompozit rezin materyallerin içeriklerindeki yeni gelişmeler. Türkiye Klinikleri Diş Hekimliği Bilimleri Dergisi. 2008; 14(3):156-67.
Cattani-Lorente M, Godin Ch, Bouillaguet S, et al. Linear polymerization shrinkage of new restorative composite resins. European Cells and Mater. 2003; 5: 40-1.
Moszner N ve Salz U. New developments of polymeric dental composites. Progress in Polymer Science. 2001; 26(4): 535-576.
Yap AU, Lye KW, Sau CW. Surface characteristics of tooth-colored restoratives polished utilizing different polishing systems. Oper Dent. 1997; 22: 260-5.
Berastegui E, Canalda C, Brau E, et al. Surface roughness of finished composite resins. The Journal of Prosthetic Dentistry. 1992; 68(5): 742-749.
Bagheri R, Burrow MF, Tyas MJ. Surface characteristics of aesthetic restorative materials - an SEM study. Journal of Oral Rehabilitation. 2007; 34(1): 68–76.
Berger SB, Palialol ARM, Cavalli V, et al. Surface roughness and staining susceptibility of composite resins after finishing and polishing. J Esthet Restor Dent. 2011; 23: 34-45.
Aytac F, Karaarslan EŞ, Agaccıoglu M, et al. Effects of Novel Finishing and Polishing Systems on Surface Roughness and Morphology of Nanocomposites. Journal of Esthetic and Restorative Dentistry. 2016; 28(4): 247-261.
Granat M, Cieloszyk J, Kowalska U, et al. Surface Geometry of Four Conventional Nanohybrid Resin-Based Composites and Four Regular Viscosity Bulk Fill Resin-Based Composites after Two-Step Polishing Procedure. BioMed research international. 2020; 6203053. Doi: doi:10.1155/2020/6203053.
Pala K, Tekçe N, Tuncer S, et al. Evaluation of the surface hardness, roughness, gloss and color of composites after different finishing/polishing treatments and thermocycling using a multitechnique approach. Dental materials journal. 2016; 35(2): 278–289.
Ergücü Z ve Türkün LS. Surface roughness of novel resin composites polished with one-step systems. Oper Dent. 2007; 32: 185-92.
Kakaboura A, Fragouli M, Rahiotis C, et al. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med. 2007; 18: 155-63
Ko HC, Han JS, Bächle M, et al. Initial osteoblast-like cell response to pure titanium and zirconia/alumina ceramics. Dent Mater. 2007; 23: 1349-55.
Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent. Mater. 1997; 13(4): 258-269.
Ehrmann E, Medioni E, Brulat-Bouchard N. Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing. Restorative dentistry & endodontics. 2018; 44(1): e1. https://doi.org/10.5395/rde.2019.44.e1
Lu H, Roeder LB, Powers JM. Effect of polishing systems on the surface roughness of microhybrid composites. Journal of Esthetic and Restorative Dentistry. 2003; 15(5): 297-303.
Janus J, Fauxpoint G, Arntz Y, et al. Surface roughness and morphology of three nanocomposites after two different polishing treatments by a multitechnique approach. Dental materials: official publication of the Academy of Dental Materials. 2010; 26(5): 416–425.
Da Costa J, Ferracane J, Paravina RD, et al. The effect of different polishing systems on surface roughness and gloss of various resin composites. J Esthet Restor Dent. 2007; 19: 214-224.
Barbosa SH, Zanata RL, Navarro MF, et al. Effect of different finishing and polishing techniques on the surface roughness of microfilled, hybrid and packable composite resins. Braz Dent J. 2005; 16: 39-44.
Venturini D, Cenci MS, Demarco FF, et al. Effect of polishing technique and time on surface roughness, hardness and microleakage of resin composite restorations. Oper Dent. 2006; 31(1): 11-17.
Jaramillo-Cartagena R, López-Galeano EJ, Latorre-Correa F, et al. Effect of Polishing Systems on the Surface Roughness of Nano-Hybrid and Nano-Filling Composite Resins: A Systematic Review. Dentistry journal. 2021; 9(8): 95.
Reis AF, Giannini M, Lovadino JR, et al. The effect of six polishing systems on the surface roughness of two packable resinbased composites. Am J Dent. 2021;15: 193-197.
Carneiro P, Ramos TM, de Azevedo CS, et al. Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins. Operative dentistry. 2016; 41(6): 634–641.
Yap AU, Yap SH, Teo CK, et al. Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems. Oper Dent. 2004; 29: 275-279.
Lu H, Lee YK, Oguri M, et al. Properties of a dental resin composite with a spherical inorganic filler. Oper Dent. 2006; 31: 734-740.
Serim ME, 2016. Farklı Bitirme ve Cila Tekniklerinin Kompozit Rezinlerin Yüzey Pürüzlülüğü Üzerine Etkilerinin İn-Vitro İncelenmesi. Uzmanlık Tezi, Kocaeli Üniversitesi Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi Anabilim Dalı, Kocaeli.
Ünlü N, Ülkü SG, Karabekiroğlu S. Abstracts of the 10th Virtual Conseuro 2021 Congress. Clinical oral investigations. 2021; 4185–4238. Advance online publication.
Soliman H, Elkholany NR, Hamama HH, et al. Effect of Different Polishing Systems on the Surface Roughness and Gloss of Novel Nanohybrid Resin Composites. European journal of dentistry. 2021; 15(2): 259–265.
Turssi CP, de Magalhaes CS, Serra MC, et al. Surface roughness assessment of resin-based materials during brushing preceded by pH-cycling simulations. Oper Dent. 2001; 26: 576-84.
Da Costa J, Adams-Belusko A, Riley K, et al. The effect of various dentifrices on surface roughness and gloss of resin composites. J Dent. 2010; 38(2): 123-8.
Karadaş M ve Demirbuğa S. Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites. Meandros Medical and Dental Journal. 2017; 18: 199.
Ruivo MA., Pacheco RR, Sebold M, et al. Surface roughness and filler particles characterization of resin-based composites. Microscopy research and technique. 2019; 82(10): 1756–1767.
Canali GD, Ignácio SA, Rached RN, et al. One-year clinical evaluation of bulk fill flowable vs. regular nanofilled composite in non-carious cervical lesions. Clinical oral investigations. 2019; 23(2): 889–897.
Üçtaşlı MB, Eligüzeloğlu E, Arısu Deniz H, et al. Turkiye Klinikleri J Dental Sci. 2008; 14: 75-9.
Üçtaşli MB, Bala O, Güllü A. Surface roughness of flowable and packable composite resin materials after finishing with abrasive discs. Journal of oral rehabilitation. 2004; 31(12): 1197–1202.
Ishii R, Takamizawa T, Tsujimoto A, et al. Effects of Finishing and Polishing Methods on the Surface Roughness and Surface Free Energy of Bulk-fill Resin Composites. Operative dentistry. 2020; 45(2): E91–E104.
Shimokawa C, Giannini M, André CB, et al. In Vitro Evaluation of Surface Properties and Wear Resistance of Conventional and Bulk-fill Resin-based Composites After Brushing With a Dentifrice. Operative dentistry. 2019; 44(6): 637–647.
Senawongse P ve Pongprueksa P. Surface roughness of nanofill and nanohybrid resin composites after polishing and brushing. Journal of Esthetic and Restorative Dentistry. 2007; 19(5): 265-275.
Antonson SA, Yazici AR, Kilinc E, et al. Comparison of different finishing/polishing systems on surface roughness and gloss of resin composites. J Dent. 2011; 39(1): e917.
Endo T, Finger WJ, Kanehira M, et al. Surface texture and roughness of polished nanofill and nanohybrid resin composites. Dent Mater J. 2010; 29(2): 213-223. doi:10.4012/dmj.2009-019.
Nasim I, Neelakantan P, Sujeer R, et al. Color stability of microfilled, microhybrid and nanocomposite resins--an in vitro study. Journal of dentistry. 2010; 38(2): e137–e142.
Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003; 24: 655-665.
Bagheri R, Burrow MF, Tyas M. Influence of foodsimulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005; 33: 389-398.
Ruyter IE, Niler K, Moller B. Color stability of dental composite materials for crowns and bridge veneers. Dental Materials. 1987; 3: 246–51.
Douglas RD. Color stability of new-generation indirect resins for prosthodontic application, J. Prosthet. Dent. 2000; 2: 166-70.
Gaintantzopoulou M, Kakaboura A, Vougiouklakis G. Colour stability of tooth-coloured restorative materials. Eur J Prosthodont Restor Dent. 2005; 13: 51-56.
Baglar S, Keskin E, Orun T, et al. Discoloration Effects of Traditional Turkish Beverages on different Composite Restoratives. The journal of contemporary dental practice. 2017; 18(2): 83–93.
Ersöz B, Karaoğlanoğlu S, Oktay EA, et al. Color Stability and Surface Roughness of Resin Based Direct and Indirect Restorative Materials. EADS. 2021; 48(1): 1-6.
Alawjali SS ve Lui JL. Effect of one-step polishing system on the color stability of nanocomposites. Journal of dentistry. 2013; 41(3): e53–e61.
Schmitt VL, Puppin-Rontani RM, Naufel FS, et al. Effect of the polishing procedures on color stability and surface roughness of composite resins. ISRN dentistry. 2011, 617672.
Alkhadim YK, Hulbah MJ, Nassar HM. Color Shift, Color Stability, and Post-Polishing Surface Roughness of Esthetic Resin Composites. Materials (Basel, Switzerland). 2020; 13(6): 1376.
Poggio C, Ceci M, Beltrami R, et al. Color stability of esthetic restorative materials: a spectrophotometric analysis. Acta biomaterialia odontologica Scandinavica. 2016; 2(1): 95–101.
Garoushi S, Lassila L, Hatem M, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontol Scand. 2013; 71: 144150.
Autio-Gold JT ve Barrett AA. Effect of fluoride varnishes on color stability of esthetic restorative materials. Oper Dent. 2004; 29: 636-641.
Boehm RF. Thermal environment of teeth during open-mouth respiration. J Dent Res. 1972; 51: 75-78.
Crabtree MG, Atkinson HF. A preliminary report on the solubility of decalcified dentine in water. Aust J Dent. 1955; 55: 340–2.
Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent. 1992; 67(3): 325-327. doi:10.1016/0022-3913(92)90239-7.
Weir MD, Chow LC, Xu HH. Remineralization of demineralized enamel via calcium phosphate nanocomposite. J Dent Res. 2012; 91(10): 979-984. doi:10.1177/0022034512458288.
Gale MS ve Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999; 27: 89-99.
Chadwick RG. Thermocycling—the effects upon the compressive strength and abrasion resistance of three composites. J Oral Rehabil. 1994; 21: 533–43.
Rinastiti M, Ozcan M, Siswomihardjo W, et al. Effects of surface conditioning on repair bond strengths of non aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig. 2011; 15: 625–33.
Iazzetti G, Burgess JO, Gardiner D, et al. Color stability of fluoride-containing restorative materials. Oper Dent. 2000; 25: 520-5.
Koc-Vural U, Baltacioglu I, Altinci P. Color stability of bulkfill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks. Restor Dent Endod. 2017; 42(2): 118–124.
Macedo M, Volpato C, Henriques B, et al. Color stability of a bis-acryl composite resin subjected to polishing, thermocycling, intercalated baths, and immersion in different beverages. Journal of esthetic and restorative dentistry: official publication of the American Academy of Esthetic Dentistry 2018; 30(5): 449–456.
Al-Samadani KH. Color stability of restorative materials in response to Arabic coffee, Turkish coffee and Nescafe. The journal of contemporary dental practice. 2013; 14(4): 681–690.
Sirin Karaarslan E, Bulbul M, Yildiz E, et al. Effects of different polishing methods on color stability of resin composites after accelerated aging. Dent Mater J. 2013; 32(1): 58-67. doi:10.4012/dmj.2012-045.
Ren YF, Feng L, Serban D, et al. Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. Journal of dentistry. 2012; 40(1): e48–e56.
Chen MH. Update on dental nanocomposites. J Dent Res. 2010; 89: 549-60.
Choi MS, Lee YK, Lim BS, et al. Changes in surface characteristics of dental resin composites after polishing. J Mater Sci Mater Med. 2005; 16(4): 347‑353.
Guler AU, Yılmaz F, Kulunk T, et al. Effects of different drinks on stainability of resin composite provisional restorative materials. The Journal of Prosthetic Dentistry. 2005; 94(2): 118124.
Kalachandra S ve Turner DT. Water sorption of polymethacrylate networks: bis-GMA/TEGDM copolymers. J Biomed Mater Res. 1987; 21: 329-38.
Li Y, Swartz ML, Philips RW, et al. Effect of filler content and size on properties of composites. Journal of Dental Research. 1985; 64: 1396–401.
Berber A, Cakir FY, Baseren M, et al. Effect of different polishing systems and drinks on the color stability of resin composite. The journal of contemporary dental practice. 2013; 14(4): 662–667.
Kocaagaoglu H, Aslan T, Gürbulak A, et al. Efficacy of polishing kits on the surface roughness and color stability of different composite resins. Nigerian journal of clinical practice. 2017; 20(5): 557–565.
Okte Z, Villalta P, García-Godoy F, et al. Surface hardness of resin composites after staining and bleaching. Oper Dent. 2006; 31(5): 623-628.
Marghalani HY. Post-irradiation vickers microhardness development of novel resin composites. Materials Research. 2010; 13(1): 81–87.
Chung KH. The relationship between composition and properties of posterior resin composites. J Dent Res. 1990; 69: 852-856.
Albers HF. Tooth Color Restoratives (9th ed). Hamilton, London: BC Decker Inc; 2002.
Roberson TM, Heymann HO, Swift JE. Sturdevant's Art & Science of Oper Dent (Vol. 4). Mosby,st. Louise; 2001: p. 190- 207.
Curtis AR, Palin WM, Fleming GJ, et al. The mechanical properties of nanofilled resin-based composites: characterizing discrete filler particles and agglomerates using a micromanipulation technique. Dental materials: official publication of the Academy of Dental Materials. 2009; 25(2): 180–187.
Ferracane JL, Aday P, Matsumoto H, et al. Relationship between shade and depth of cure for light-activated dental composite resins. Dental Materials. 1986; 2(2): 80-84.
Ruyter IE ve Oysaed H. Conversion in different depths of ultraviolet and visible light activated composite materials. Acta Odontologica Scandinavica. 1982; 40(3): 179-192.
Asmussen E. Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scan J Dent Res. 1982; 90: 490-496.
Erdemir U, Sancakli HS, Yildiz E. The effect of one-step and multi-step polishing systems on the surface roughness and microhardness of novel resin composites. European journal of dentistry. 2012; 6(2): 198–205.
Söderholm KJ, Zigan M, Ragan M, et al. Hydrolytic degradation of dental composites. J Dent Res 1984; 63: 1248-1254.
Tuncer S, Demirci M, Tiryaki M, et al. The effect of a modeling resin andthermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent. 2013; 25: 404-419.
Hahnel S, Henrich A, Bürgers R, et al. Investigation of mechanical properties of modern dental composites after artificial aging for one year. Oper Dent. 2010; 35: 412-9.
Ho CT, Vijayaraghavan TV, Lee SY, et al. Flexural behaviour of post-cured composites at oral-simulating temperatures. J Oral Rehabil. 2001; 28: 658-67.
Catelan A, Briso AL, Sundfeld RH, et al. Effect of artificial aging on the roughness and microhardness of sealed composites. Journal of esthetic and restorative dentistry: official publication of the American Academy of Esthetic Dentistry. 2010; 22(5): 324–330.
Dietschi D, Campanile G, Holz J. Comparison of the color stability of 10 new-generation composites: An in vitro study. Dent Mater. 1994; 10: 353-62.
Ozkanoglu S ve Akin EGG. Evaluation of the effect of various beverages on the color stability and microhardness of restorative materials. Niger J Clin Pract. 2020; 23: 322-8.
Barve D, Dave P, Gulve M, et al. Assessment of microhardness and color stability of micro-hybrid and nano-filled composite resins. Nigerian journal of clinical practice. 2021; 24(10): 1499–1505.
Curtis AR, Shortall AC, Marquis PM, et al. Water uptake and strength characteristics of a nanofilled resin-based composite. J Dent. 2008; 36(3): 186–193.
Scougall-Vilchis RJ, Hotta Y, Hotta M, et al. Examination of composite resins with electron microscopy, microhardness tester andenergy dispersive X-ray microanalyzer. Dent Mater J. 2009; 28(1): 102–112.
Pala K, Tekçe N, Tuncer S, et al. Flexural strength and microhardness of anterior composites after accelerated aging. Journal of clinical and experimental dentistry. 2017; 9(3): e424–e430.
Ehrmann E, Medioni E, Brulat-Bouchard N. Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing. Restorative dentistry & endodontics. 2018; 44(1): e1. https://doi.org/10.5395/rde.2019.44.e1
Korkmaz Y, Ozel E, Attar N, et al. Influence of one-step polishing systems on the surface roughness and microhardness of nanocomposites. Oper Dent. 2008; 33: 44-50.
Van Noort R ve Davis LG. The surface finish of composite resin restorative materials. Br Dent J. 1984; 157: 360–364.
Lins FC, Ferreira RC, Silveira RR, et al. Surface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing. International Journal of Dentistry. 2016; 8346782.
Sarac D, Sarac YS, Kulunk S, et al. The effect of polishing techniques on the surface roughness and color change of composite resins. The Journal of prosthetic dentistry. 2006; 96(1): 33–40.
Mandikos MN, McGivney GP, Davis E, et al. A comparison of the wear resistance and hardness of indirect composite resins. J Prosthet Dent. 2001; 85(4): 386–395.
Referanslar
Garg, N. ve Garg, A. Textbook of Operative Dentistry. New Delhi: Jaypee Brothers Medical Publishers; 2010.
Ünlü N. ve Çetin AR. Kompozit rezin materyallerin içeriklerindeki yeni gelişmeler. Türkiye Klinikleri Diş Hekimliği Bilimleri Dergisi. 2008; 14(3):156-67.
Cattani-Lorente M, Godin Ch, Bouillaguet S, et al. Linear polymerization shrinkage of new restorative composite resins. European Cells and Mater. 2003; 5: 40-1.
Moszner N ve Salz U. New developments of polymeric dental composites. Progress in Polymer Science. 2001; 26(4): 535-576.
Yap AU, Lye KW, Sau CW. Surface characteristics of tooth-colored restoratives polished utilizing different polishing systems. Oper Dent. 1997; 22: 260-5.
Berastegui E, Canalda C, Brau E, et al. Surface roughness of finished composite resins. The Journal of Prosthetic Dentistry. 1992; 68(5): 742-749.
Bagheri R, Burrow MF, Tyas MJ. Surface characteristics of aesthetic restorative materials - an SEM study. Journal of Oral Rehabilitation. 2007; 34(1): 68–76.
Berger SB, Palialol ARM, Cavalli V, et al. Surface roughness and staining susceptibility of composite resins after finishing and polishing. J Esthet Restor Dent. 2011; 23: 34-45.
Aytac F, Karaarslan EŞ, Agaccıoglu M, et al. Effects of Novel Finishing and Polishing Systems on Surface Roughness and Morphology of Nanocomposites. Journal of Esthetic and Restorative Dentistry. 2016; 28(4): 247-261.
Granat M, Cieloszyk J, Kowalska U, et al. Surface Geometry of Four Conventional Nanohybrid Resin-Based Composites and Four Regular Viscosity Bulk Fill Resin-Based Composites after Two-Step Polishing Procedure. BioMed research international. 2020; 6203053. Doi: doi:10.1155/2020/6203053.
Pala K, Tekçe N, Tuncer S, et al. Evaluation of the surface hardness, roughness, gloss and color of composites after different finishing/polishing treatments and thermocycling using a multitechnique approach. Dental materials journal. 2016; 35(2): 278–289.
Ergücü Z ve Türkün LS. Surface roughness of novel resin composites polished with one-step systems. Oper Dent. 2007; 32: 185-92.
Kakaboura A, Fragouli M, Rahiotis C, et al. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med. 2007; 18: 155-63
Ko HC, Han JS, Bächle M, et al. Initial osteoblast-like cell response to pure titanium and zirconia/alumina ceramics. Dent Mater. 2007; 23: 1349-55.
Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent. Mater. 1997; 13(4): 258-269.
Ehrmann E, Medioni E, Brulat-Bouchard N. Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing. Restorative dentistry & endodontics. 2018; 44(1): e1. https://doi.org/10.5395/rde.2019.44.e1
Lu H, Roeder LB, Powers JM. Effect of polishing systems on the surface roughness of microhybrid composites. Journal of Esthetic and Restorative Dentistry. 2003; 15(5): 297-303.
Janus J, Fauxpoint G, Arntz Y, et al. Surface roughness and morphology of three nanocomposites after two different polishing treatments by a multitechnique approach. Dental materials: official publication of the Academy of Dental Materials. 2010; 26(5): 416–425.
Da Costa J, Ferracane J, Paravina RD, et al. The effect of different polishing systems on surface roughness and gloss of various resin composites. J Esthet Restor Dent. 2007; 19: 214-224.
Barbosa SH, Zanata RL, Navarro MF, et al. Effect of different finishing and polishing techniques on the surface roughness of microfilled, hybrid and packable composite resins. Braz Dent J. 2005; 16: 39-44.
Venturini D, Cenci MS, Demarco FF, et al. Effect of polishing technique and time on surface roughness, hardness and microleakage of resin composite restorations. Oper Dent. 2006; 31(1): 11-17.
Jaramillo-Cartagena R, López-Galeano EJ, Latorre-Correa F, et al. Effect of Polishing Systems on the Surface Roughness of Nano-Hybrid and Nano-Filling Composite Resins: A Systematic Review. Dentistry journal. 2021; 9(8): 95.
Reis AF, Giannini M, Lovadino JR, et al. The effect of six polishing systems on the surface roughness of two packable resinbased composites. Am J Dent. 2021;15: 193-197.
Carneiro P, Ramos TM, de Azevedo CS, et al. Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins. Operative dentistry. 2016; 41(6): 634–641.
Yap AU, Yap SH, Teo CK, et al. Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems. Oper Dent. 2004; 29: 275-279.
Lu H, Lee YK, Oguri M, et al. Properties of a dental resin composite with a spherical inorganic filler. Oper Dent. 2006; 31: 734-740.
Serim ME, 2016. Farklı Bitirme ve Cila Tekniklerinin Kompozit Rezinlerin Yüzey Pürüzlülüğü Üzerine Etkilerinin İn-Vitro İncelenmesi. Uzmanlık Tezi, Kocaeli Üniversitesi Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi Anabilim Dalı, Kocaeli.
Ünlü N, Ülkü SG, Karabekiroğlu S. Abstracts of the 10th Virtual Conseuro 2021 Congress. Clinical oral investigations. 2021; 4185–4238. Advance online publication.
Soliman H, Elkholany NR, Hamama HH, et al. Effect of Different Polishing Systems on the Surface Roughness and Gloss of Novel Nanohybrid Resin Composites. European journal of dentistry. 2021; 15(2): 259–265.
Turssi CP, de Magalhaes CS, Serra MC, et al. Surface roughness assessment of resin-based materials during brushing preceded by pH-cycling simulations. Oper Dent. 2001; 26: 576-84.
Da Costa J, Adams-Belusko A, Riley K, et al. The effect of various dentifrices on surface roughness and gloss of resin composites. J Dent. 2010; 38(2): 123-8.
Karadaş M ve Demirbuğa S. Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites. Meandros Medical and Dental Journal. 2017; 18: 199.
Ruivo MA., Pacheco RR, Sebold M, et al. Surface roughness and filler particles characterization of resin-based composites. Microscopy research and technique. 2019; 82(10): 1756–1767.
Canali GD, Ignácio SA, Rached RN, et al. One-year clinical evaluation of bulk fill flowable vs. regular nanofilled composite in non-carious cervical lesions. Clinical oral investigations. 2019; 23(2): 889–897.
Üçtaşlı MB, Eligüzeloğlu E, Arısu Deniz H, et al. Turkiye Klinikleri J Dental Sci. 2008; 14: 75-9.
Üçtaşli MB, Bala O, Güllü A. Surface roughness of flowable and packable composite resin materials after finishing with abrasive discs. Journal of oral rehabilitation. 2004; 31(12): 1197–1202.
Ishii R, Takamizawa T, Tsujimoto A, et al. Effects of Finishing and Polishing Methods on the Surface Roughness and Surface Free Energy of Bulk-fill Resin Composites. Operative dentistry. 2020; 45(2): E91–E104.
Shimokawa C, Giannini M, André CB, et al. In Vitro Evaluation of Surface Properties and Wear Resistance of Conventional and Bulk-fill Resin-based Composites After Brushing With a Dentifrice. Operative dentistry. 2019; 44(6): 637–647.
Senawongse P ve Pongprueksa P. Surface roughness of nanofill and nanohybrid resin composites after polishing and brushing. Journal of Esthetic and Restorative Dentistry. 2007; 19(5): 265-275.
Antonson SA, Yazici AR, Kilinc E, et al. Comparison of different finishing/polishing systems on surface roughness and gloss of resin composites. J Dent. 2011; 39(1): e917.
Endo T, Finger WJ, Kanehira M, et al. Surface texture and roughness of polished nanofill and nanohybrid resin composites. Dent Mater J. 2010; 29(2): 213-223. doi:10.4012/dmj.2009-019.
Nasim I, Neelakantan P, Sujeer R, et al. Color stability of microfilled, microhybrid and nanocomposite resins--an in vitro study. Journal of dentistry. 2010; 38(2): e137–e142.
Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003; 24: 655-665.
Bagheri R, Burrow MF, Tyas M. Influence of foodsimulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005; 33: 389-398.
Ruyter IE, Niler K, Moller B. Color stability of dental composite materials for crowns and bridge veneers. Dental Materials. 1987; 3: 246–51.
Douglas RD. Color stability of new-generation indirect resins for prosthodontic application, J. Prosthet. Dent. 2000; 2: 166-70.
Gaintantzopoulou M, Kakaboura A, Vougiouklakis G. Colour stability of tooth-coloured restorative materials. Eur J Prosthodont Restor Dent. 2005; 13: 51-56.
Baglar S, Keskin E, Orun T, et al. Discoloration Effects of Traditional Turkish Beverages on different Composite Restoratives. The journal of contemporary dental practice. 2017; 18(2): 83–93.
Ersöz B, Karaoğlanoğlu S, Oktay EA, et al. Color Stability and Surface Roughness of Resin Based Direct and Indirect Restorative Materials. EADS. 2021; 48(1): 1-6.
Alawjali SS ve Lui JL. Effect of one-step polishing system on the color stability of nanocomposites. Journal of dentistry. 2013; 41(3): e53–e61.
Schmitt VL, Puppin-Rontani RM, Naufel FS, et al. Effect of the polishing procedures on color stability and surface roughness of composite resins. ISRN dentistry. 2011, 617672.
Alkhadim YK, Hulbah MJ, Nassar HM. Color Shift, Color Stability, and Post-Polishing Surface Roughness of Esthetic Resin Composites. Materials (Basel, Switzerland). 2020; 13(6): 1376.
Poggio C, Ceci M, Beltrami R, et al. Color stability of esthetic restorative materials: a spectrophotometric analysis. Acta biomaterialia odontologica Scandinavica. 2016; 2(1): 95–101.
Garoushi S, Lassila L, Hatem M, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontol Scand. 2013; 71: 144150.
Autio-Gold JT ve Barrett AA. Effect of fluoride varnishes on color stability of esthetic restorative materials. Oper Dent. 2004; 29: 636-641.
Boehm RF. Thermal environment of teeth during open-mouth respiration. J Dent Res. 1972; 51: 75-78.
Crabtree MG, Atkinson HF. A preliminary report on the solubility of decalcified dentine in water. Aust J Dent. 1955; 55: 340–2.
Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent. 1992; 67(3): 325-327. doi:10.1016/0022-3913(92)90239-7.
Weir MD, Chow LC, Xu HH. Remineralization of demineralized enamel via calcium phosphate nanocomposite. J Dent Res. 2012; 91(10): 979-984. doi:10.1177/0022034512458288.
Gale MS ve Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999; 27: 89-99.
Chadwick RG. Thermocycling—the effects upon the compressive strength and abrasion resistance of three composites. J Oral Rehabil. 1994; 21: 533–43.
Rinastiti M, Ozcan M, Siswomihardjo W, et al. Effects of surface conditioning on repair bond strengths of non aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig. 2011; 15: 625–33.
Iazzetti G, Burgess JO, Gardiner D, et al. Color stability of fluoride-containing restorative materials. Oper Dent. 2000; 25: 520-5.
Koc-Vural U, Baltacioglu I, Altinci P. Color stability of bulkfill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks. Restor Dent Endod. 2017; 42(2): 118–124.
Macedo M, Volpato C, Henriques B, et al. Color stability of a bis-acryl composite resin subjected to polishing, thermocycling, intercalated baths, and immersion in different beverages. Journal of esthetic and restorative dentistry: official publication of the American Academy of Esthetic Dentistry 2018; 30(5): 449–456.
Al-Samadani KH. Color stability of restorative materials in response to Arabic coffee, Turkish coffee and Nescafe. The journal of contemporary dental practice. 2013; 14(4): 681–690.
Sirin Karaarslan E, Bulbul M, Yildiz E, et al. Effects of different polishing methods on color stability of resin composites after accelerated aging. Dent Mater J. 2013; 32(1): 58-67. doi:10.4012/dmj.2012-045.
Ren YF, Feng L, Serban D, et al. Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. Journal of dentistry. 2012; 40(1): e48–e56.
Chen MH. Update on dental nanocomposites. J Dent Res. 2010; 89: 549-60.
Choi MS, Lee YK, Lim BS, et al. Changes in surface characteristics of dental resin composites after polishing. J Mater Sci Mater Med. 2005; 16(4): 347‑353.
Guler AU, Yılmaz F, Kulunk T, et al. Effects of different drinks on stainability of resin composite provisional restorative materials. The Journal of Prosthetic Dentistry. 2005; 94(2): 118124.
Kalachandra S ve Turner DT. Water sorption of polymethacrylate networks: bis-GMA/TEGDM copolymers. J Biomed Mater Res. 1987; 21: 329-38.
Li Y, Swartz ML, Philips RW, et al. Effect of filler content and size on properties of composites. Journal of Dental Research. 1985; 64: 1396–401.
Berber A, Cakir FY, Baseren M, et al. Effect of different polishing systems and drinks on the color stability of resin composite. The journal of contemporary dental practice. 2013; 14(4): 662–667.
Kocaagaoglu H, Aslan T, Gürbulak A, et al. Efficacy of polishing kits on the surface roughness and color stability of different composite resins. Nigerian journal of clinical practice. 2017; 20(5): 557–565.
Okte Z, Villalta P, García-Godoy F, et al. Surface hardness of resin composites after staining and bleaching. Oper Dent. 2006; 31(5): 623-628.
Marghalani HY. Post-irradiation vickers microhardness development of novel resin composites. Materials Research. 2010; 13(1): 81–87.
Chung KH. The relationship between composition and properties of posterior resin composites. J Dent Res. 1990; 69: 852-856.
Albers HF. Tooth Color Restoratives (9th ed). Hamilton, London: BC Decker Inc; 2002.
Roberson TM, Heymann HO, Swift JE. Sturdevant's Art & Science of Oper Dent (Vol. 4). Mosby,st. Louise; 2001: p. 190- 207.
Curtis AR, Palin WM, Fleming GJ, et al. The mechanical properties of nanofilled resin-based composites: characterizing discrete filler particles and agglomerates using a micromanipulation technique. Dental materials: official publication of the Academy of Dental Materials. 2009; 25(2): 180–187.
Ferracane JL, Aday P, Matsumoto H, et al. Relationship between shade and depth of cure for light-activated dental composite resins. Dental Materials. 1986; 2(2): 80-84.
Ruyter IE ve Oysaed H. Conversion in different depths of ultraviolet and visible light activated composite materials. Acta Odontologica Scandinavica. 1982; 40(3): 179-192.
Asmussen E. Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scan J Dent Res. 1982; 90: 490-496.
Erdemir U, Sancakli HS, Yildiz E. The effect of one-step and multi-step polishing systems on the surface roughness and microhardness of novel resin composites. European journal of dentistry. 2012; 6(2): 198–205.
Söderholm KJ, Zigan M, Ragan M, et al. Hydrolytic degradation of dental composites. J Dent Res 1984; 63: 1248-1254.
Tuncer S, Demirci M, Tiryaki M, et al. The effect of a modeling resin andthermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent. 2013; 25: 404-419.
Hahnel S, Henrich A, Bürgers R, et al. Investigation of mechanical properties of modern dental composites after artificial aging for one year. Oper Dent. 2010; 35: 412-9.
Ho CT, Vijayaraghavan TV, Lee SY, et al. Flexural behaviour of post-cured composites at oral-simulating temperatures. J Oral Rehabil. 2001; 28: 658-67.
Catelan A, Briso AL, Sundfeld RH, et al. Effect of artificial aging on the roughness and microhardness of sealed composites. Journal of esthetic and restorative dentistry: official publication of the American Academy of Esthetic Dentistry. 2010; 22(5): 324–330.
Dietschi D, Campanile G, Holz J. Comparison of the color stability of 10 new-generation composites: An in vitro study. Dent Mater. 1994; 10: 353-62.
Ozkanoglu S ve Akin EGG. Evaluation of the effect of various beverages on the color stability and microhardness of restorative materials. Niger J Clin Pract. 2020; 23: 322-8.
Barve D, Dave P, Gulve M, et al. Assessment of microhardness and color stability of micro-hybrid and nano-filled composite resins. Nigerian journal of clinical practice. 2021; 24(10): 1499–1505.
Curtis AR, Shortall AC, Marquis PM, et al. Water uptake and strength characteristics of a nanofilled resin-based composite. J Dent. 2008; 36(3): 186–193.
Scougall-Vilchis RJ, Hotta Y, Hotta M, et al. Examination of composite resins with electron microscopy, microhardness tester andenergy dispersive X-ray microanalyzer. Dent Mater J. 2009; 28(1): 102–112.
Pala K, Tekçe N, Tuncer S, et al. Flexural strength and microhardness of anterior composites after accelerated aging. Journal of clinical and experimental dentistry. 2017; 9(3): e424–e430.
Ehrmann E, Medioni E, Brulat-Bouchard N. Finishing and polishing effects of multiblade burs on the surface texture of 5 resin composites: microhardness and roughness testing. Restorative dentistry & endodontics. 2018; 44(1): e1. https://doi.org/10.5395/rde.2019.44.e1
Korkmaz Y, Ozel E, Attar N, et al. Influence of one-step polishing systems on the surface roughness and microhardness of nanocomposites. Oper Dent. 2008; 33: 44-50.
Van Noort R ve Davis LG. The surface finish of composite resin restorative materials. Br Dent J. 1984; 157: 360–364.
Lins FC, Ferreira RC, Silveira RR, et al. Surface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing. International Journal of Dentistry. 2016; 8346782.
Sarac D, Sarac YS, Kulunk S, et al. The effect of polishing techniques on the surface roughness and color change of composite resins. The Journal of prosthetic dentistry. 2006; 96(1): 33–40.
Mandikos MN, McGivney GP, Davis E, et al. A comparison of the wear resistance and hardness of indirect composite resins. J Prosthet Dent. 2001; 85(4): 386–395.
